Monday, May 9, 2016

Can A Chain Saw Be Used To Prune Bushes?




Chainsaws can be used in tidying up shrubs and hedges in your garden.  While not as effective as a hedge trimmer, a chainsaw can cut fast enough to trim through lighter woods.  However, if you're looking for those precision cuts, a hedge trimmer will best serve your purposes. A chainsaw is very useful in tidying up your garden.

Choosing the Bar Length

Longer Bars are used by chainsaws compared to hedge trimmers usually for cutting bigger wood.  However, chainsaws often allow up to 3 different size bars to work on the chainsaw. If you plan on cutting a lot of bushes, go to the lowest bar size recommended for your chainsaw, which will give added control to the cutting and reduce the cutting area.  If you just want to get through it quick, use a longer bar to whack those bushes. Taller and larger shrubs need to be cut using larger bars of chainsaws.

Keep Chain Sharp

To cut the materials effectively, the owner must maintain the sharpness of the chainsaws. The sharpness of the chains determine the precision of the cuts, and prevent the chainsaws from snapping with twigs. Also, loosen the tension on the chain slightly, turning the tensioner screw about a half turn counterclockwise, which will give the chain added flexibility and will stop the chain from binding against the lighter woods. It will also prevent the chain from popping off the bar suddenly.




Methods in Operating

Correctly operating the chainsaw will greatly reduce the risk of injury to the operator. To slice or cut the twigs of bushes, pull the trigger fully to ensure full capacity of the chainsaw. The risk of having binds will be reduce by this. The underside and tips of the chainsaw can be used for maximum potential of the chainsaw in cutting.  However, if your handles prevent safe handling of the chainsaw in this manner, work with just the tip of the saw. Having a partner while working is advisable in case of any accident.

Precautionary Measures

 When using a chainsaw, always wear the proper protective clothing. An added piece of protective gear --- chainsaw chaps --- should be used when brushing. It is used in your front legs to protect it from chain pops during the trimming of shrubs.  Never cut with the power head above your head; if you have taller hedges and bushes, use a pole saw or other equipment to safely cut those are

No comments:

Post a Comment